1966 aztec

i no thats right i dont no but we can hope it will be the tires are on the wheels those things sucked geting on 215-35-18 that short sidewall made it hard for 2 of us but hope to take it to the fiberglass shop saterday an fix the front fender arches then it will turn pink

got it on all four wheels today an it looks killer the front of the body is even with a sprite can an the car will role by pushing with one finger started making the brakes for the rack an pinnion steering but i have to take the body back off tomorrow to install it its coming along good

pics or it didn't happen lol

callahan wrote:pics or it didn't happen lol

did it happen iv got to pull the body back off today oh joy

that thing looks like something out of Roswell NM (U.F.O.) rad as can be

i think it was made for tiny aliens....my back is killing me from folding up in that thing!!

you are the man david thanks for your help i wish we could have videoed you roling in an out of it but there will always be a chance during install

got the body off installed the rack an pinion off of a 911 had to make the brackets but what fun would it be if a welder was not involved hope to have the front end finished tomorrow then finger out the shifter cable

DOODLE BUGG wrote:hope to have the front end finished tomorrow then finger out the shifter cable

hahaha

rebuilt a rack an pinnion an installed new boots off of a 914 this morning FYI a 914 rack is the same width as a bug front end you just have to make a mount to go on the frame head an use u-joints cause its going to come through the center of the fire wall pics tonight i hope if i finish welding my braket got to go pick up alot of parts today the guy has started talkin crazy i will post every thing i get there to an let yall no

got the rebuilt rack installed an started on the shifter cable its got me scratching my head its going to hook up i just hope the spacing for the gears is the same its a Hurst quarter stick it looks awesome too

me an bryce put the body back on yesterday an im going to pull it back off again to day because i got my steering colom suport tacked in just need to weld it up solid an cut the tube an turn dodn the shaft so the ujoints will fit an i hope it will steer from the steering wheel

drilled my rotors an pressed in the studs for 4x100 an they wont need adapters up front so the tires can com in 3/4 of an inch on each side heck yes so the frame stifiners go in to night an motor then hope to go down the roadon the frame at least

well been busy working on every thing but this got the body in the garage an the motor will be going on tomorrow night get a gas cable hooked up an blow some smoke

got the motor on all i have left to do is wire it up an hook up the torqe converter an im going to watch tracy take it down the road just the frame ofcorse hoping to get it all together an back to the fiberglass shop friday night but i have desided not to make planes any more because i might let my self down the motor is around 5-6 inches off the ground it lookes sweet hope to see some smoke tomorrow night we will see

we need some pics

just sent the gas tank off to powder coat an the motor is on with the converter bolted up that sucked i had to cut out a spot on the botom of the block to install the converter bolts wired up the motor hope to blow some smoke tonight an see how it shifts out

really cool car, I cant wait to see a video of you driving her down the road

i cant wait to see it either but its going to be my wife on the video with out the body

fired it up few minutes ago man it sounds good i got a old rusty header from tim the exhaust points up an it made a brown cloud in my shop it even is cranking off of a lawn mower battery with 300 cca it was the smallest battery i cuold get with out spending 150 dollars i will post pics some time tomorrow i might even drive the frame

U driving it to Reyonlds? Are you guys camping with us?

prbobably wont camp cause my dad is talking about driving the buggy so i will ride with him if thats the case but we will see

damn doodle get that finished for bap i wanna see it! if u need any help give me a call,

thanks for the offer im planing on trashing this weeekend an trying to get somemore stuff done so i can get the dang thing painted